Carbide Bits / GATR
G87KCSBSR-CO
22 mm sharp carbide grader bit
In Stock

Rendered in house for illustration only, not an exact replica. The drawing and specifications give the exact dimensions.

Check your board: Barbed ring bits need a board with the milled ring inside each holder for the barb to sit in. Some older boards don't have it, so check your board before ordering. Every GATR scarifier board has it.
Specifications
| Brand | GATR |
|---|---|
| Part number | G87KCSBSR-CO |
| Size | 22 mm (fits 22 mm bit boards) |
| Bits per foot | Up to 7 (also fits 6 per foot boards) |
| Retainer style | Barbed ring |
| Carbide diameter | 25 mm (0.98") |
| Carbide projection | 18.49 mm (0.73") |
| Tip shape | Sharp |
| Head diameter | 40 mm (1.57") |
| Length | 86 mm (3.39") |
| Carbide overlay | Yes, on the head |
| Box quantity | 50 bits |
| Shipping | Free shipping to the Lower 48 |
About this part
GATR G87KCSBSR-CO is a 22 mm sharp carbide grader bit: 25 mm carbide tip, 40 mm head, 86 mm long. It fits 22 mm bit boards with up to 7 bits per foot and is held in with a barbed retainer ring. The bit rotates in the board as it cuts, so the carbide wears evenly instead of flattening on one side. Sold by the box of 50. Free shipping to the Lower 48.
Cross-reference & alternatives
- Brand / partGATR G87KCSBSR-CO
- Similar sizeGATR G87KCSBSR →
GATR is the DMC Wear Parts house brand.
