Scarifier Boards / HDXL

GATR-48XL

4 ft GATR HDXL Scarifier Board, Hard Electrode Strip *compare to Severe Duty

Also known as GATR-48CE, DMC48CE, DMC48C-ELECTRODE

In Stock
Length48"
Height7.3"
Thickness1-1/4"
DutyHDXL
Bits required24

Get a quote

Boards

GATR-48XL
GATR-48XL 4 ft GATR HDXL Scarifier Board, Hard Electrode Strip, 24 Bits, 22 mm

Bits optional

GATR G855HDW blunt bit, box of 50
GATR G87KCSBSR sharp bit, box of 50

Each board holds 24 bits; one box of 50 fills 2 boards. Any 22 mm bit fits.

Add hardware Plow Bolts, nuts & washers (optional). Have a 5/8" punched moldboard? Add step bolts here.

This board has 9 bolt holes. (9 x 3/4" x 3" Plow Bolts and 9 Hex Nuts per board)

3/4" x 3" Plow Bolt 1J6762 Recommended
3/4" x 3-1/4" Plow Bolt PB-330
3/4" x 3-1/2" Plow Bolt 3/4X3-1/2PB
3/4" x 3-3/4" Plow Bolt 5F8933
Moldboard punched 5/8"?
3/4" x 3" Step Plow Bolt (5/8" thread)
5/8" Hex Nut 4K0367
3/4" Hex Nut 2J3506
3/4" Lock Nut 1K6870
3/4" Flange Lock Nut
3/4" Hardened Washer 5P8248

Have a 5/8" punched moldboard? GATR boards are punched 3/4". Simply use Step Plow Bolts: a 3/4" head on a 5/8" thread. We'll confirm Plow Bolt length for your moldboard with your quote.

Freight is quoted with your order (US only).

Stock levels change quickly. We’ll confirm availability and lead time with your quote.

Specifications

BrandGATR
Part numberGATR-48XL
RatingHDXL (compare to Severe Duty)
Length4 ft (48", 1217.61 mm)
Height7.3" (185.74 mm)
Thickness1-1/4" (31.75 mm)
Profile45° x 3/4" bevel on the back edge
Bit holes24, on 2" centers
Bits per foot6
Bit size22 mm, all styles
Bit holdersMilled ring in every holder, so barbed ring bits lock in
MountingBolt-on, 3/4" Plow Bolts
Bolt holes9, 3/4" punch (square hole)
Hole spacing3"-6"-6"-6"-6"-6"-6"-3"
Hard electrodeHard electrode strip along the holders, 226.48 sq in
Weight119 lb (54 kg)
Also known asGATR-48CE, DMC48CE, DMC48C-ELECTRODE

About this part

GATR-48XL is a GATR 4 ft (48") scarifier board: our HDXL board: a hard electrode strip welded along the holder bar, so the board face doesn't wash out and no cover plate is needed. It holds 24 bits on 2" centers (6 per foot) and takes any 22 mm grader bit. 7.3" tall, 1-1/4" thick, 9 bolt holes (3/4" punch (square hole)) spaced 3"-6"-6"-6"-6"-6"-6"-3". Weighs about 119 lb.

Cross-reference & other versions